Technical data BRECOprotect® T10 PRO

1. Tooth shear strength

specific tooth force

Rotational speed n [rpm] Ftspez [N/cm] Rotational speed n [rpm] Ftspez [N/cm]
0 50,5 2000 25,4
20 49 2200 24,6
40 47,7 2400 23,9
60 46,6 2600 23,3
80 45,7 2800 22,7
100 44,8 3000 22,2
200 41,4 3200 21,7
300 39,1 3400 21,2
400 37,2 3600 20,7
500 35,7 3800 20,3
600 34,4 4000 19,86
700 33,3 4500 18,91
800 32,4 5000 18,06
900 31,5 5500 17,28
1000 30,7 6000 16,58
1100 30 6500 15,93
1200 29,3 7000 15,33
1300 28,7 7500 14,76
1400 28,2 8000 14,24
1500 27,6 8500 13,74
1600 27,1 9000 13,28
1700 26,7 9500 12,84
1800 26,2 10000 12,42
1900 25,8    

The specific tooth force Ftspez is the maximum force N a belt tooth with a width of 1 cm can transmit. This value depends on the rotational speed of the drive pulley. The calculation takes into account each identical carrying values for each meshing tooth. With more than 12 meshing teeth ze is limited to 12.

\begin{align}
F_t&= {F_{tspez} \cdot z_e \cdot b}\\
F_t& = {\text{Tangential force}}\\
F_{tspez}&= {\text{Specific tooth force in N/cm}}\\
b& = \text{Belt width in cm} \\
z_e&= \text{Number of meshing teeth}\\
z_{emax}&= 12
\end{align}

2. Tension cord strength (M) Ftzul [N] (open length)

permitted tensile force of the belt cross-section

Belt width b [mm] 16 25 32 50 75 100
BRECO T10 PRO 1400 2200 2800 4400 6600 8800

Specific elasticity Cspez [N]:

Bsp: 10[6] = 106

Belt width b [mm] 16 25 32 50 75 100
BRECO T10 PRO 3,5*10[5] 5,5*10[5] 7,0*10[5] 11,0*10[5] 16,5*10[5] 22,0*10[5]

Belt weights [kg/m]:

Belt width b [mm] 16 25 32 50 75 100
BRECO T10 PRO 0,073 0,114 0,145 0,227 0,341 0,454

3. Flexibility

Minimum number of teeth, minimum diameter

 

( X ) without contraflexure

 

 

( X X ) with contraflexure

 

Belt type Number of teeth Tension roller Number of teeth Tension roller
  zmin (X) dmin [mm] (X) zmin (XX) dmin [mm] (XX)
BRECO T10 PRO 15 60 20 60