ATP15 CONTI® SYNCHROFLEX polyurethane timing belt

Version:

  • Single-sided
  • High performance ATP profile with metric pitch and optimised meshing with a double support of the tooth head
  • The technical data refer to the high performance casting polyurethane (DADU 9311, colour: red) and steel tension members
  • Available preferred
  • Preferred belt widths: 25, 32, 50, 75, 100, 150 mm

On request:

  • Double-sided; with flights on the back of the belt; with reinforced back of the belt; polyurethane special materials; further tension member versions (steel, textile tension member); antistatic, coloured, mechanical reworked
  • In-between widths, larger widths and other dimensions are possible on request

Please consider our warranty.

standard storage goods
Length Teeth
[mm]
CAD 1125 75 CAD
CAD 1185 79 CAD
CAD 1260 84 CAD
CAD 1560 104 CAD

Belt width b [cm]

\begin{align}
b& = {F_U \over {z_e \cdot F_{Uspez}}} && F_U [N] \\
b& = {100 \cdot M \over {z_1 \cdot z_e \cdot M_{spez}}} && M [Nm]\\
b& = {1000 \cdot P \over {z_1 \cdot z_e  \cdot P_{spez}}} && P [kW]
\end{align}

Load bearing characteristics of the drive

when belt width [cm] is

\begin{align}
F_{U}& = {F_{Uspez} \cdot z_e \cdot b} &&[N]\\
M& = {{M_{spez} \cdot z_1 \cdot z_e \cdot b} \over {100}} &&[Nm]\\
P& = {{P_{spez} \cdot z_1 \cdot z_e \cdot b} \over {1000}} &&[kW]
\end{align}

Number of teeth in mesh

\begin{align}
 z_{e max}& = {12}\\
 z_e& = {{{z_1} \over {180}} \cdot \arccos{{t \cdot (z_2 - z_1)} \over {2\pi \cdot a}}}\\
 \end{align}

 

1. Tooth shear strength

specific belt tooth strength

Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm] Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm]
0 143,325 34,216 0,000 2200 69,141 16,506 38,027
20 140,945 33,648 0,705 2400 66,523 15,881 39,914
40 138,722 33,117 1,387 2600 64,094 15,301 41,661
60 136,637 32,620 2,050 2800 61,828 14,760 43,280
80 134,674 32,151 2,693 3000 59,706 14,254 44,779
100 132,818 31,708 3,320 3200 57,709 13,777 46,167
150 128,584 30,697 4,822 3400 55,824 13,327 47,451
200 124,823 29,799 6,241 3600 54,040 12,901 48,636
300 118,367 28,258 8,877 3800 52,345 12,496 49,727
400 112,952 26,965 11,295 4000 50,731 12,111 50,731
500 108,288 25,852 13,536 4500 47,006 11,222 52,881
600 104,193 24,874 15,629 5000 43,652 10,421 54,565
700 100,542 24,003 17,595 5500 40,602 9,693 55,828
800 97,249 23,216 19,450 6000 37,806 9,026 56,709
900 94,249 22,500 21,206 6500 35,225 8,409 57,240
1000 91,495 21,843 22,874 7000 32,827 7,837 57,447
1100 88,949 21,235 24,461 7500 30,589 7,303 57,354
1200 86,583 20,670 25,975 8000 28,490 6,802 56,980
1300 84,372 20,142 27,421 8500 26,515 6,330 56,344
1400 82,297 19,647 28,804 9000 24,649 5,884 55,460
1500 80,343 19,180 30,128 9500 22,881 5,462 54,342
1600 78,495 18,739 31,398 10000 21,201 5,061 53,003
1700 76,745 18,321 32,616
1800 75,080 17,924 33,786
1900 73,494 17,545 34,910
2000 71,980 17,184 35,990

Rotational speeds over 10000 rpm and/or belt speeds over 40 m/s are in need of a special drive design. Please request for our advice.

2. Tension cord strength [N]

permitted tensile force of the belt Fzul

Belt width b [mm] 25 32 50 75 100 150
SYNCHROFLEX ATP15 4950 6750 11250 17550 23850 36450

3. Belt weights [kg/m]

Belt width b [mm] 25 32 50 75 100 150
SYNCHROFLEX ATP15 0,200 0,256 0,400 0,600 0,800 1,2

4. Flexibility

Minimum numbers of teeth, minimum diameter

( X ) without contraflexure

( X X ) with contraflexure

Belt type Number of teeth zmin ( X ) Tension roller dmin [mm] ( X ) Number of teeth zmin ( X X ) Tension roller dmin [mm] ( X X )
SYNCHROFLEX ATP15 20 100 30 160

ATP15 CONTI® SYNCHROFLEX Polyurethan-Zahnriemen