T10-DL-PAZ-E BRECOFLEX® polyurethane timing belt

Version:

  • Nylon facing on double-sided belts, coating is only possible on the inner side
  • Preferred belt widths: 16, 25, 32, 50, 75, 100 mm
  • In-between widths, larger widths and other dimensions are possible on request

Available endless lengths:

  • For standard lengths refer to table
  • Under 1,080 mm: further lengths on request
  • Over 1,080 mm: any number of teeth available (minimum purchase amount for intermediate lengths on request)
  • Over 5,300 mm: minimum purchase amount on request
  • Over 20,000 mm: please enquire

Please consider our warranty.

standard storage goods
Length Teeth
[mm]
CAD 1080 108 CAD
CAD 1150 115 CAD
CAD 1210 121 CAD
CAD 1240 124 CAD
CAD 1250 125 CAD
CAD 1320 132 CAD
CAD 1350 135 CAD
CAD 1390 139 CAD
CAD 1400 140 CAD
CAD 1420 142 CAD
CAD 1460 146 CAD
CAD 1500 150 CAD
CAD 1560 156 CAD
CAD 1610 161 CAD
CAD 1750 175 CAD
CAD 1780 178 CAD
CAD 1880 188 CAD
CAD 1960 196 CAD
CAD 2250 225 CAD
CAD 2360 236 CAD
CAD 2500 250 CAD
CAD 2650 265 CAD
CAD 2800 280 CAD
CAD 3000 300 CAD
CAD 3100 310 CAD
CAD 3150 315 CAD
CAD 3350 335 CAD
CAD 3750 375 CAD
CAD 4000 400 CAD
CAD 4250 425 CAD
CAD 4500 450 CAD
CAD 4750 475 CAD
CAD 5000 500 CAD
CAD 5300 530 CAD
CAD 5600 560 CAD
CAD 6000 600 CAD
CAD 6300 630 CAD
CAD 6700 670 CAD
CAD 7100 710 CAD
CAD 7500 750 CAD
CAD 8000 800 CAD
CAD 9000 900 CAD

Belt width b [cm]

\begin{align}
b& = {F_U \over {z_e \cdot F_{Uspez}}} && F_U [N] \\
b& = {100 \cdot M \over {z_1 \cdot z_e \cdot M_{spez}}} && M [Nm]\\
b& = {1000 \cdot P \over {z_1 \cdot z_e  \cdot P_{spez}}} && P [kW]
\end{align}

Load bearing characteristics of the drive

when belt width [cm] is

\begin{align}
F_{U}& = {F_{Uspez} \cdot z_e \cdot b} &&[N]\\
M& = {{M_{spez} \cdot z_1 \cdot z_e \cdot b} \over {100}} &&[Nm]\\
P& = {{P_{spez} \cdot z_1 \cdot z_e \cdot b} \over {1000}} &&[kW]
\end{align}

Number of teeth in mesh

\begin{align}
 z_{e max}& = {12}\\
 z_e& = {{{z_1} \over {180}} \cdot \arccos{{t \cdot (z_2 - z_1)} \over {2\pi \cdot a}}}\\
 \end{align}

 

1. Tooth shear strength

specific belt tooth strength

Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm] Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm]
0 50,500 8,040 0,000 2000 25,400 4,040 8,460
20 49,000 7,800 0,163 2200 24,600 3,920 9,030
40 47,700 7,600 0,318 2400 23,900 3,810 9,580
60 46,600 7,420 0,466 2600 23,300 3,710 10,100
80 45,700 7,270 0,609 2800 22,700 3,620 10,600
100 44,800 7,130 0,746 3000 22,200 3,530 11,080
200 41,400 6,600 1,381 3200 21,700 3,450 11,550
300 39,100 6,220 1,953 3400 21,200 3,360 11,990
400 37,200 5,920 2,480 3600 20,700 3,300 12,420
500 35,700 5,680 2,980 3800 20,300 3,230 12,840
600 34,400 5,480 3,440 4000 19,860 3,160 13,240
700 33,300 5,310 3,890 4500 18,910 3,010 14,180
800 32,400 5,150 4,320 5000 18,060 2,870 15,050
900 31,500 5,010 4,730 5500 17,280 2,750 15,840
1000 30,700 4,890 5,120 6000 16,580 2,640 16,580
1100 30,000 4,770 5,500 6500 15,930 2,540 17,260
1200 29,300 4,670 5,870 7000 15,330 2,440 17,880
1300 28,700 4,570 6,220 7500 14,760 2,350 18,460
1400 28,200 4,480 6,570 8000 14,240 2,270 18,990
1500 27,600 4,400 6,910 8500 13,740 2,180 19,470
1600 27,100 4,320 7,230 9000 13,280 2,110 19,920
1700 26,700 4,240 7,550 9500 12,840 2,040 20,300
1800 26,200 4,170 7,860 10000 12,420 1,976 20,700
1900 25,800 4,100 8,160

Rotational speeds over 10000 rpm and/or belt speeds over 80 m/s are in need of a special drive design. Please request for our advice.

2. Tension cord strength [N]

permitted tensile force of the belt Fzul

Belt width b [mm] 16 25 32 50 75 100 150
SYNCHROFLEX T10 1200 2000 2700 4300 6600 8800 13400
SYNCHROFLEX T10-DL 1200 2000 2700 4300 6600 8800 13400
SYNCHROFLEX T10-FA 1200 2000 2700 4300 6600 8800 13400
SYNCHROFLEX T10-E 1200 2000 2700 4300 6600 8800 13400
BRECOFLEX T10 1000 1800 2300 3800 5800 7800 -
BRECOFLEX T10-E 1000 1800 2300 3800 5800 7800 -
BRECOFLEX T10-DL 1000 1800 2300 3800 5800 7800 -
BRECOFLEX T10-DL-E 1000 1800 2300 3800 5800 7800 -
BRECOFLEX T10-T 1000 1800 2300 3800 5800 7800 -
BRECOFLEX T10-DR 1000 1800 2300 3800 5800 7800 -

3. Belt weights [kg/m]

Belt width b [mm] 16 25 32 50 75 100 150
SYNCHROFLEX T10 0,077 0,120 0,154 0,240 0,630 0,480 0,720
SYNCHROFLEX T10-DL 0,091 0,143 0,182 0,285 0,428 0,570 0,855
SYNCHROFLEX T10-FA 0,077 0,120 0,154 0,240 0,630 0,480 0,720
SYNCHROFLEX T10-E 0,077 0,120 0,154 0,240 0,630 0,480 0,720
BRECOFLEX T10 0,068 0,114 0,145 0,227 0,341 0,454 -
BRECOFLEX T10-E 0,068 0,114 0,145 0,227 0,341 0,454 -
BRECOFLEX T10-DL 0,090 0,143 0,183 0,288 0,432 0,577 -
BRECOFLEX T10-DL-E 0,090 0,143 0,183 0,288 0,432 0,577 -
BRECOFLEX T10-T 0,107 0,170 0,217 0,342 0,513 0,685 -
BRECOFLEX T10-DR 0,119 0,185 0,237 0,372 0,558 0,795 -

4. Flexibility

Minimum numbers of teeth, minimum diameter

( X ) without contraflexure

( X X ) with contraflexure

Belt type Number of teeth zmin ( X ) Tension roller dmin [mm] ( X ) Number of teeth zmin ( X X ) Tension roller dmin [mm] ( X X )
SYNCHROFLEX T10 12 60 20 60
SYNCHROFLEX T10-DL 12 60 20 60
SYNCHROFLEX T10-FA 12 60 20 60
SYNCHROFLEX T10-E 10 50 15 50
BRECOFLEX T10 12 60 20 60
BRECOFLEX T10-E 10 50 15 50
BRECOFLEX T10-DL 20 60 20 60
BRECOFLEX T10-DL-E 15 50 15 50
BRECOFLEX T10-T 20 60 20 80
BRECOFLEX T10-DR 20 60 20 80

T10-DL-PAZ-E BRECOFLEX® Polyurethan-Zahnriemen