ATL5-PAZ BRECO® polyurethane timing belt (open length)

Version:

  • with nylon tooth facing (PAZ)
  • Open length
  • Preferred delivery in rolls of 50 or 100 m
  • Preferred timing belt widths: 16, 25, 32, 50 mm

Note:

  • Please specify shorter dimensions (cut to length) separately
  • Please specify lengths above 100 m separately
  • Endless joined BRECO® TIMING BELTS (V) see Transport technology
  • In-between belt widths are available

Please consider our warranty.

standard storage goods
Cut to length
[mm]
CAD 50000 CAD
CAD 100000 CAD
CAD CAD

1. Tooth shear strength

specific tooth force

Rotational speed n [rpm] Ftspez [N/cm] Rotational speed n [rpm] Ftspez [N/cm]
0 42 2000 26,05
20 41,521 2200 25,377
40 41,069 2400 24,755
60 40,641 2600 24,177
80 40,234 2800 23,637
100 39,846 3000 23,13
200 38,142 3200 22,654
300 36,733 3400 22,203
400 35,531 3600 21,776
500 34,483 3800 21,37
600 33,554 4000 20,983
700 32,721 4500 20,089
800 31,964 5000 19,284
900 31,271 5500 18,55
1000 30,633 6000 17,877
1100 30,04 6500 17,255
1200 29,488 7000 16,677
1300 28,971 7500 16,138
1400 28,484 8000 15,631
1500 28,025 8500 15,154
1600 27,59 9000 14,704
1700 27,177 9500 14,277
1800 26,784 10000 13,871
1900 26,409    

The specific tooth force Ftspez is the maximum force N a belt tooth with a width of 1 cm can transmit. This value depends on the rotational speed of the drive pulley. The calculation takes into account each identical carrying values for each meshing tooth. With more than 12 meshing teeth ze is limited to 12.

\begin{align}
F_t&= {F_{tspez} \cdot z_e \cdot b}\\
F_t& = {\text{Tangential force}}\\
F_{tspez}&= {\text{Specific tooth force in N/cm}}\\
b& = \text{Belt width in cm} \\
z_e&= \text{Number of meshing teeth}\\
z_{emax}&= 12
\end{align}

2. Tension cord strength (M) Ftzul [N] (open length)

permitted tensile force of the belt cross-section

Belt width b [mm] 16 25 32 50
BRECO ATL 5 1300 2000 2800 4200

Specific elasticity Cspez [N]:

Bsp: 10[6] = 106

Belt width b [mm] 16 25 32 50
BRECO ATL 5 0,33*10[6] 0,50*10[6] 0,65*10[6] 1,05*10[6]

Belt weights [kg/m]:

Belt width b [mm] 16 25 32 50
BRECO ATL 5 0,059 0,090 0,119 0,187

Pulley width [mm]:

Belt width b [mm] 16 25 32 50
BRECO ATL 5 22 32 40 60

3. Flexibility

Minimum number of teeth, minimum diameter

 

( X ) without contraflexure

 

 

( X X ) with contraflexure

 

Belt type Number of teeth zmin ( X ) Tension roller dmin [mm] ( X ) Number of teeth zmin ( X X ) Tension roller dmin [mm] ( X X )
  zmin (X) dmin [mm] (X) zmin (XX) dmin [mm] (XX)
BRECO ATL 5 25 40 25 60

ATL5-PAZ BRECO® Polyurethan-Zahnriemen (Meterware)