HTD5M-HP CONTI® SYNCHRODRIVE polyurethane timing belt (open length)

Version:

  • single-sided; standard colour black
  • HP reinforced tension member version

High capacity profile HTD (high torque drive) with a round tooth for a perfect meshing behaviour and optimised force - and load distribution according to the design ISO/F DIS 13050

The technical data refer to standard polyurethane (thermoplastic) and standard steel cord tension members (two-filament arrangement S+Z).

On request:

  • Polyurethane special materials
  • additional tension member versions (steel)
  • optional with nylon tooth facing (PAZ) and/or backing (PAR)
  • antistatic
  • In-between width
  • Special lengths
  • endless joined timing belts (V) with more than 1000mm length and 5mm pitch

Standard lengths: 30m and/or 60m

Please consider our warranty.

standard storage goods
Cut to length
[mm]
CAD 30000 CAD
CAD 60000 CAD
CAD CAD

1. Tooth shear strength

specific tooth force

Rotational speed n [rpm] Ftspez [N/cm] Rotational speed n [rpm] Ftspez [N/cm]
0 38,220 1900 21,720
20 37,586 2000 21,384
40 37,003 2200 20,756
60 36,464 2400 20,178
80 35,961 2600 19,642
100 35,491 2800 19,143
150 34,434 3000 18,676
200 33,511 3200 18,237
300 31,955 3400 17,823
400 30,674 3600 17,431
500 29,585 3800 17,060
600 28,638 4000 16,706
700 27,800 4500 15,890
800 27,048 5000 15,157
900 26,367 5500 14,491
1000 25,744 6000 13,881
1100 25,170 6500 13,317
1200 24,639 7000 12,795
1300 24,143 7500 12,307
1400 23,679 8000 11,850
1500 23,243 8500 11,420
1600 22,831 9000 11,014
1700 22,441 9500 10,629
1800 22,072 10000 10,264

The specific tooth force Ftspez is the maximum force N a belt tooth with a width of 1 cm can transmit. This value depends on the rotational speed of the drive pulley. The calculation takes into account each identical carrying values for each meshing tooth. With more than 12 meshing teeth ze is limited to 12.

\begin{align}
F_t&= {F_{tspez} \cdot z_e \cdot b}\\
F_t& = {\text{Tangential force}}\\
F_{tspez}&= {\text{Specific tooth force in N/cm}}\\
b& = \text{Belt width in cm} \\
z_e&= \text{Number of meshing teeth}\\
z_{emax}&= 12
\end{align}

2. Tension cord strength (M) Ftzul [N] (open length)

permitted tensile force of the belt cross-section

Belt width b [mm] 5 10 15 25 50
HTD5M-HF 150 300 450 750 1500
HTD5M-HP 325 650 975 1625 3250

Specific elasticity Cspez [N]:

Bsp: 10[6] = 106

Belt width b [mm] 5 10 15 25 50
HTD5M-HF 3,75*10[4] 7,5*10[4] 1,125*10[5] 1,875*10[5] 3,75*10[5]
HTD5M-HP 1,0*10[5] 2,0*10[5] 3,0*10[5] 5,0*10[5] 1,0*10[6]

Belt weights [kg/m]:

Belt width b [mm] 5 10 15 25 50
HTD5M-HF 0,0168 0,0336 0,0504 0,084 0,168
HTD5M-HP 0,0203 0,0406 0,0609 0,1015 0,203

3. Flexibility

Minimum number of teeth, minimum diameter

 

( X ) without contraflexure

 

 

( X X ) with contraflexure

 

Belt type Number of teeth Tension roller Tension roller
  zmin (X) dmin [mm] (X) dmin [mm] (XX)
HTD5M-HF 12 19,1 30
HTD5M-HP 16 25,46 50

HTD5M-HP CONTI® SYNCHRODRIVE Polyurethan-Zahnriemen (Meterware)