HTD14M-HP-PAZ CONTI® SYNCHRODRIVE polyurethane timing belt (open length)

Version:

  • single-sided; standard colour black
  • HP reinforced tension member version
  • with nylon tooth facing (PAZ)

High capacity profile HTD (high torque drive) with a round tooth for a perfect meshing behaviour and optimised force - and load distribution according to the design ISO/F DIS 13050

The technical data refer to standard polyurethane (thermoplastic) and standard steel cord tension members (two-filament arrangement S+Z).

On request:

  • Polyurethane special materials
  • additional tension member versions (steel)
  • optional with nylon tooth facing (PAZ) and/or backing (PAR)
  • antistatic
  • In-between width
  • Special lengths
  • endless joined timing belts (V) with more than 1000mm length and 5mm pitch

Standard lengths: 30m and/or 60m

Please consider our warranty.

standard storage goods
Cut to length
[mm]
CAD 30000 CAD
CAD 60000 CAD
CAD CAD

1. Tooth shear strength

specific tooth force

Rotational speed n [rpm] Ftspez [N/cm] Rotational speed n [rpm] Ftspez [N/cm]
0 114,660 1900 54,745
20 112,610 2000 53,449
40 110,696 2200 51,018
60 108,901 2400 48,777
80 107,212 2600 46,698
100 105,616 2800 44,759
150 101,976 3000 42,943
200 98,745 3200 41,234
300 93,201 3400 39,621
400 88,554 3600 38,093
500 84,554 3800 36,643
600 81,043 4000 35,262
700 77,913 4500 32,074
800 75,091 5000 29,204
900 72,521 5500 26,595
1000 70,161 6000 24,202
1100 67,980 6500 21,994
1200 65,953 7000 19,942
1300 64,059 7500 18,027
1400 62,283 8000 16,232
1500 60,609 8500 14,542
1600 59,027 9000 12,945
1700 57,528 9500 11,433
1800 56,103 10000 9,996

The specific tooth force Ftspez is the maximum force N a belt tooth with a width of 1 cm can transmit. This value depends on the rotational speed of the drive pulley. The calculation takes into account each identical carrying values for each meshing tooth. With more than 12 meshing teeth ze is limited to 12.

\begin{align}
F_t&= {F_{tspez} \cdot z_e \cdot b}\\
F_t& = {\text{Tangential force}}\\
F_{tspez}&= {\text{Specific tooth force in N/cm}}\\
b& = \text{Belt width in cm} \\
z_e&= \text{Number of meshing teeth}\\
z_{emax}&= 12
\end{align}

2. Tension cord strength (M) Ftzul [N] (open length)

permitted tensile force of the belt cross-section

Belt width b [mm] 25 40 50 85 100 115 120
HTD14M-HF 3000 4800 6000 10200 12000
HTD14M-HP 5250 8400 10500 17850 21000 24150 25200
HTD14M-XHP 15100 18900 32100 37800 43450 45350

Specific elasticity Cspez [N]:

Bsp: 10[6] = 106

Belt width b [mm] 25 40 50 85 100 115 120
HTD14M-HF 8,75*10[5] 1,4*10[6] 1,75*10[6] 2,975*10[6] 3,5*10[6]
HTD14M-HP 1,325*10[6] 2,12*10[6] 2,65*10[6] 4,505*10[6] 5,3*10[6] 6,095*10[6] 6,36*10[6]
HTD14M-XHP 3,64*10[6] 4,55*10[6] 7,735*10[6] 9,1*10[6] 1,047*10[7] 1,092*10[7]

Belt weights [kg/m]:

Belt width b [mm] 25 40 50 85 100 115 120
HTD14M-HF 0,25925 0,4148 0,5185 0,88145 1,037
HTD14M-HP 0,28175 0,4508 0,5635 0,95795 1,127 1,29605 1,3524
HTD14M-XHP 0,56 0,7 1,19 1,4 1,61 1,68

3. Flexibility

Minimum number of teeth, minimum diameter

 

( X ) without contraflexure

 

 

( X X ) with contraflexure

 

Belt type Number of teeth Tension roller Tension roller
  zmin (X) dmin [mm] (X) dmin [mm] (XX)
HTD14M-HF 18 80,21 120
HTD14M-HP 26 115,86 180
HTD14M-XHP 44 196,08 250

HTD14M-HP-PAZ CONTI® SYNCHRODRIVE Polyurethan-Zahnriemen (Meterware)