T1/5" BRECO® polyurethane timing belt (open length)

Version:

  • Preferred delivery in rolls of 50 or 100 m
  • Cut to lengths / lengths > 100 m on request
  • Standard material: TPUST1 (further materials on request)
  • Steel tension member (standard)
  • Belt widths: 6.35, 7.94, 9.53, 12.7, 19.1, 25.4 mm (in-between widths on request)

Please consider our warranty.

standard storage goods
Cut to length
[mm]
CAD 50000 CAD
CAD 100000 CAD
CAD CAD

1. Tooth shear strength

specific tooth force

Rotational speed n [rpm] Ftspez [N/cm] Rotational speed n [rpm] Ftspez [N/cm]
0 24,4 2000 13,91
20 23,8 2200 13,60
40 23,2 2400 13,31
60 22,8 2600 13,05
80 22,4 2800 12,80
100 22,0 3000 12,57
200 20,6 3200 12,36
300 19,63 3400 12,16
400 18,86 3600 11,96
500 18,23 3800 11,78
600 17,70 4000 11,61
700 17,24 4500 11,21
800 16,83 5000 10,86
900 16,47 5500 10,54
1000 16,14 6000 10,24
1100 15,84 6500 9,97
1200 15,57 7000 9,72
1300 15,31 7500 9,49
1400 15,07 8000 9,27
1500 14,85 8500 9,06
1600 14,64 9000 8,86
1700 14,45 9500 8,68
1800 14,26 10000 8,51
1900 14,08

The specific tooth force Ftspez is the maximum force N a belt tooth with a width of 1 cm can transmit. This value depends on the rotational speed of the drive pulley. The calculation takes into account each identical carrying values for each meshing tooth. With more than 12 meshing teeth ze is limited to 12.

\begin{align}
F_t&= {F_{tspez} \cdot z_e \cdot b}\\
F_t& = {\text{Tangential force}}\\
F_{tspez}&= {\text{Specific tooth force in N/cm}}\\
b& = \text{Belt width in cm} \\
z_e&= \text{Number of meshing teeth}\\
z_{emax}&= 12
\end{align}

2. Tension cord strength (M) Ftzul [N] (open length)

permitted tensile force of the belt cross-section

Belt width b [mm] 6,35 7,94 9,53 12,7 19,1 25,4
BRECO T 1/5´´ 210 240 330 390 660 840

Specific elasticity Cspez [N]:

Bsp: 10[6] = 106

Belt width b [mm] 6,35 7,94 9,53 12,7 19,1 25,4
BRECO T 1/5´´ 5,25*10[4] 6,0*10[4] 8,25*10[4] 9,75*10[4] 1,65*10[4] 2,1*10[4]

Belt weights [kg/m]:

Belt width b [mm] 6,35 7,94 9,53 12,7 19,1 25,4
BRECO T 1/5´´ 0,015 0,019 0,023 0,030 0,046 0,061

3. Flexibility

Minimum number of teeth, minimum diameter

 

( X ) without contraflexure

 

 

( X X ) with contraflexure

 

Belt type Number of teeth Tension roller Number of teeth Tension roller
  zmin (X) dmin [mm] (X) zmin (XX) dmin [mm] (XX)
BRECO T 1/5´´ 10 30 15 30

T1/5" BRECO® Polyurethan-Zahnriemen (Meterware)