ATP10
CONTI® SYNCHROFLEX polyurethane timing belt

Version:

  • Single-sided
  • High performance ATP profile with metric pitch and optimised meshing with a double support of the tooth head
  • The technical data refer to standard casting polyurethane and steel tension members
  • Preferred belt widths: 16, 25, 32, 50, 75, 100 mm

On request:

  • Reinforced back of the belt
  • Polyurethane special materials (colour: red)
  • Reinforced tension members
  • Antistatic, coloured, mechanical reworked
  • In-between widths, larger widths and other lengths

Please consider our warranty.

standard storage goods
Length Teeth
[mm]
CAD 630 63 CAD
CAD 660 66 CAD
CAD 700 70 CAD
CAD 780 78 CAD
CAD 840 84 CAD
CAD 890 89 CAD
CAD 920 92 CAD
CAD 1010 101 CAD
CAD 1080 108 CAD
CAD 1150 115 CAD
CAD 1280 128 CAD
CAD 1400 140 CAD
CAD 1650 165 CAD
CAD 1800 180 CAD

Belt width b [cm]

\begin{align}
b& = {F_U \over {z_e \cdot F_{Uspez}}} && F_U [N] \\
b& = {100 \cdot M \over {z_1 \cdot z_e \cdot M_{spez}}} && M [Nm]\\
b& = {1000 \cdot P \over {z_1 \cdot z_e  \cdot P_{spez}}} && P [kW]
\end{align}

Load bearing characteristics of the drive

when belt width [cm] is

\begin{align}
F_{U}& = {F_{Uspez} \cdot z_e \cdot b} &&[N]\\
M& = {{M_{spez} \cdot z_1 \cdot z_e \cdot b} \over {100}} &&[Nm]\\
P& = {{P_{spez} \cdot z_1 \cdot z_e \cdot b} \over {1000}} &&[kW]
\end{align}

Number of teeth in mesh

\begin{align}
 z_{e max}& = {12}\\
 z_e& = {{{z_1} \over {180}} \cdot \arccos{{t \cdot (z_2 - z_1)} \over {2\pi \cdot a}}}\\
 \end{align}

 

1. Tooth shear strength

specific belt tooth strength

Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm] Rotational speed n [rpm] Fuspez [N/cm] Mspez [Ncm/cm] Pspez [W/cm]
0 95,500 15,199 0,000 1900 53,323 8,487 16,884
20 94,098 14,976 0,314 2000 52,396 8,339 17,464
40 92,785 14,767 0,619 2200 50,656 8,062 18,572
60 91,551 14,571 0,915 2400 49,052 7,807 19,619
80 90,385 14,385 1,205 2600 47,562 7,570 20,609
100 89,282 14,210 1,488 2800 46,173 7,349 21,546
150 86,756 13,808 2,169 2880 45,642 7,264 21,907
200 84,505 13,449 2,817 3000 44,871 7,141 22,434
300 80,642 12,835 4,032 3200 43,645 6,946 23,276
400 77,357 12,312 5,157 3400 42,488 6,762 24,075
500 74,535 11,863 6,211 3600 41,393 6,588 24,834
600 72,052 11,467 7,205 3800 40,352 6,422 25,554
700 69,834 11,114 8,147 4000 39,361 6,264 26,239
730 69,212 11,015 8,420 4500 37,073 5,900 27,803
800 67,831 10,796 9,043 5000 35,012 5,572 29,175
900 66,004 10,505 9,900 5500 33,138 5,274 30,374
1000 64,325 10,238 10,720 6000 31,419 5,000 31,417
1100 62,772 9,990 11,507 6500 29,832 4,748 32,316
1200 61,328 9,761 12,265 7000 28,358 4,513 33,082
1300 59,977 9,546 12,994 7500 26,981 4,294 33,724
1400 58,709 9,344 13,698 8000 25,691 4,089 34,252
1460 57,984 9,228 14,108 8500 24,475 3,895 34,670
1500 57,514 9,154 14,377 9000 23,328 3,713 34,989
1600 56,348 8,968 15,025 9500 22,240 3,540 35,211
1700 55,313 8,803 15,671 10000 21,207 3,375 35,342
1800 54,294 8,641 16,287      

Rotational speeds over 10000 rpm and/or belt speeds over 60 m/s are in need of a special drive design. Please request for our advice.

2. Tension cord strength [N]

permitted tensile force of the belt Fzul

Belt width b [mm] 16 25 32 50 75 100 150
SYNCHROFLEX ATP10 2000 3500 4750 7750 12000 16000 24500
SYNCHROFLEX ATP10-E 2000 3500 4750 7750 12000 16000 24500

3. Belt weights [kg/m]

Belt width b [mm] 16 25 32 50 75 100 150
SYNCHROFLEX ATP10 0,096 0,150 0,192 0,300 0,450 0,600 0,9
SYNCHROFLEX ATP10-E 0,096 0,150 0,192 0,300 0,450 0,600 0,9

4. Flexibility

Minimum numbers of teeth, minimum diameter

( X ) without contraflexure

( X X ) with contraflexure

Belt type Number of teeth zmin ( X ) Tension roller dmin [mm] ( X ) Number of teeth zmin ( X X ) Tension roller dmin [mm] ( X X )
SYNCHROFLEX ATP10 15 50 25 120
SYNCHROFLEX ATP10-E 12 50 20 80

ATP10
 CONTI® SYNCHROFLEX Polyurethan-Zahnriemen